Datalogic MINEC 4x User Manual
                                                           | |
Contents
| 
USE AND FUNCTIONING2533.8.1 PC IrDA to Terminal IrDA ConnectionFor this connection, the Minec 4x IrDA port can be used for ActiveSync by placing itwithin the range of the PC IrDA port. The necessary drivers are already installed onthe PC.3.8.2 Cradle ConnectionThe ActiveSync connection can also be made using the Minec 4x Cradle. In thiscase, to guarantee a correct connection between the host and the Minec 4x terminalthrough the Minec 4x cradle, the necessary RS232 driver has to be installed, and iseither already present in the operating system, or can be installed from the CD-ROM.In order to install the RS232 driver, it is necessary to have at least the following:- PC with a Pentium processor;- One of the following operating systems:Windows 2000Windows XPNOTEOnce the RS232 driver has been installed, the communicationbetween PC and cradle will be performed through a virtual Infraredport.Before performing the installation, ensure that the Minec 4x cradle has already beenconnected to the PC serial port.1. Start the “Add/Remove Hardware Wizard” in the PC Control Panel: |
Related manuals for Datalogic MINEC 4x
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine