Datalogic Matrix 210N Reference Manual

Also see for Matrix 210N: Manual

Contents

Datalogic Matrix 210N Reference Manual Manual pdf 87 page image

CBX ELECTRICAL CONNECTIONS7544.7 EXTERNAL LIGHTING SYSTEMSIf an External Illuminator is used, it can be powered from the CBX connection box. It must beconnected to the Vdc and GND terminal clamps.CAUTION: Power is available directly to the Illuminator, independently fromthe Power Supply Switch inside the CBX. Disconnect the power supply whenworking inside the CBX.In the case of the LT-700 illuminator, one of the available digital outputs must be connectedas the control signal. In DL.CODE, configure the Output Line Function parameter to one ofthe External Illuminator selections: Always On or Strobed.Control Signal for LT-700illuminatorsPower to ExternalIlluminatorFigure 61 – External Lighting System ConnectionsBelow is a table summarizing the External Illuminator wiring and power requirements:Illuminator Wire Color CBX/Matrix Signal MeaningLT-700 Red Vdc 10 to 30 VdcBlack GND GroundWhite Earth Shield/Earth GroundGreen O1- or O2- Control Signal -Yellow O1+ or O2+ Control Signal +