Datalogic PowerScan PBT9500-RT Quick Reference Manual

Datalogic PowerScan PBT9500-RT Quick Reference Manual Manual pdf 30 page image

Operating Mode20 PowerScan™ Retail PBT9500-RTOperating ModeScan ModeThe imager can be set to operate in one of several scan-ning modes. See the PRG for more information and set-tings for any of the options:Trigger Single (Default) — When the trigger is pulled, scan-ning is activated until one of the following occurs:• a programmable duration 1 has elapsed• a label has been read• the trigger is releasedTrigger Hold Multiple — When the trigger is pulled, scan-ning starts and the product scans until the trigger isreleased or “maximum scan on time”1 has elapsed. Read-ing a label does not disable scanning. Double Read Time-out1 prevents undesired multiple reads in this mode.Trigger Pulse Multiple — When the trigger is pulled andreleased, scanning is activated until programmable dura-tion1 has elapsed or the trigger has been pulled again totransition to another state. Double Read Timeout1 pre-vents undesired multiple reads while in this mode.Flashing — The reader flashes1 on and off regardless of thetrigger status.Always On — No trigger pull is required to read a bar code.Scanning is continually on. If the trigger is pulled, thereader acts as if it is in Trigger Single (Default) Mode. Dou-ble Read Timeout1 prevents undesired multiple readswhile in this mode.Stand Mode — No trigger pull is required to read a bar code.Scanning is turned on automatically when an item isplaced in reader’s field of view. If the trigger is pulled, thereader acts as if it is in Single Read mode. Double ReadTimeout1 prevents undesired multiple reads while in thismode.1. See the Product Reference Guide (PRG) for more informa-tion