Datalogic Rhino-NET 40012 User Manual

Datalogic Rhino-NET 40012 User Manual Manual pdf 39 page image

USE AND OPERATION 33.5.4 Bluetooth Manager Device SetupIn order to enable a Bluetooth device for communication with the Rhino-NET™/ RF-3 EU BTLow Temp terminal you must perform the discovery procedure and enable the device asfollows:1. Place the Bluetooth device within range of the Rhino-NET™ terminal (10 meters).2. From the Rhino-NET™ Control Panel, select and run the Bluetooth Device Propertiesapplet.3. Run the Discovery procedure: "Scan Device". The following window will appear.4.5. Move the discovered device (the one with the Activesync icon, see figure) to the Trustedlist.6. Activate the device as shown below.7.8. Close the Bluetooth Manager by selecting OK.The Bluetooth connection will be established by Rhino-NET™ (Master) upon redirection ofthe Port to Bluetooth, see par. 3.5.3.25