Datalogic SC6000 Reference Manual

Also see for Controller SC6000: Quick reference guide Reference manual Installation manual Quick reference guide

Datalogic SC6000 Reference Manual Manual pdf 28 page image

SC60002Reading Performance WindowThis window displays the following data:• Number of the processed parcels• Good Read Rate• No Read Rate• Multiple Read RateReading Mask WindowThis window indicates the node that performed a reading of the codes enabled on themaster.The following indicators are used:" * " The node read a barcode enabled on the master." - " The node read no barcode.I/O Status WindowThis window provides data concerning the conveyor speed and the digital input/output status.System Info WindowThis window provides information about the software release.2.6.2 Menu ModeFor security purposes, the menu mode is entered by pressing the ENTER and MENU keys atthe same time.Through this menu, it is possible to perform the following:• Main Parameter Setting: IP address, Netmask, Gateway address; Profibus address(for Profibus models); DeviceNet address (for DeviceNet models); supplementaryIP address, supplementary Netmask, and supplementary Gateway address (forDual Ethernet models).These parameters may be set through the Genius™ program (see chapter 3 fordetails).• Date&Time setting;• DARP™ (Datalogic Automatic Replacement Procedure);• CASP™ (Cluster AutoSetup Procedure): this procedure allows automatic addressassignment to the scanner cluster nodes. This operation can also be performed bystarting up the system while pressing the SETUP key.16