Datalogic SG2 Instruction Manual

Also see for SG2 BASE Series: Instruction manual Original instructions Instruction manual Instruction manual

Contents

Datalogic SG2 Instruction Manual Manual pdf 45 page image

Instruction Manual SG2 EXTENDED418. PERIODICAL CHECKSThe following is a list of recommended check and maintenance operations that should be periodicallycarried out by qualified personnel.Check that: The ESPE stays locked ( ) during beam interruption along the entire protected area, using thesuitable “Test Piece”. (*) The ESPE is correctly aligned. Gently press onto product side in both directions. The red LEDshould remain OFF . Enabling the TEST function, the OSSD outputs should open (the red LED is ON and thecontrolled machine stops). The response time upon machine STOP (including response time of the ESPE and of the machine)is within the limits defined for the calculation of the safety distance (see chapter 2 “Installationmode”). The safety distance between the dangerous areas and the ESPE are in accordance with theinstructions included in chapter 2 “Installation mode”. Access of a person between ESPE and machine dangerous parts is not possible nor is it possiblefor him/her to stay there. Access to the dangerous area of the machine from any unprotected area is not possible. The ESPE and the external electrical connections are not damaged.The frequency of checks depends on the particular application and on the operating conditions of thesafety light curtain.(*) according to the Fig.13 schemeVerify that: ESPE remains blocked ( ) intercepting the beams along the protected area using the specifictest piece, following the Fig.12 scheme.TP30 for light curtains with 30 mm resolution: SG2-30-XX-XTP50 for light curtains with 50 mm resolution: SG2-50-XX-XTP90 for light curtains with 90 mm resolution: SG2-90-XX-X