Datalogic Skorpio Quick Start Manual

Also see for Skorpio: Quick start guide Specification sheet User manual User manual User manual

Contents

rs232 connection

Datalogic Skorpio Quick Start Manual Manual pdf 1 page image

Datalogic Skorpio™ Serial/Modem CradleThe Datalogic Skorpio™ Serial/Modem Cradle is a battery charger and also functions as a serialcommunication interface between the host computer (RS232) and the RS232 contacts on the DatalogicSkorpio™ mobile computer.Figure 1 – Datalogic Skorpio™ Serial/Modem Cradle General ViewKey:A) Battery recharge and RS232 contactsB) Power indicator LEDC) Connector for host computer connection (RS232)D) Power supply connectorE) Modem connectorData can be transmitted to the Host launching the communication software on the mobile computer and theninserting it into the cradle slot. By inserting the mobile computer into the cradle, the mobile computer batterycharging starts.822000731 (Rev. A)Correct Mobile Computer Insertion / RemovalFor correct insertion onto the cradle, insert the mobile computer from the top of the cradle and push it downfirmly.Figure 2 - Mobile Computer InsertionTo remove the mobile computer from the Datalogic Skorpio™ cradle, simply pull it upwards while holding thecradle firmly down.TECHNICAL FEATURESElectrical FeaturesPower supply * 9 VDC Min – 30 VDC MaxConsumption 12 W MaxIndicators Power LEDCharge time 4 Hours (Li ION batteries)Communication FeaturesInterface RS232Baud rate 9600 - 115200Environmental FeaturesWorking temperature 0° to +50 °C **Storage temperature -20 °C to +60 °CHumidity 90% non condensingDegree of protection IP20Mechanical FeaturesDimensions 85 x 106 x 90 mmWeight 350 g* Recommended DL power supply: FPS18.** Batteries must be charged at a temperature ranging from 0° to 45 °C.BACDE

/ 2

Related manuals for Datalogic Skorpio