Change Touch Screen Sensitiveness78 TaskBookParametersCopy the testing tool on the Desktop of your PC and connect it to thecontroller board by USB cable. If the tool is not on the device, copy thefolder with all the files necessary to run the software on the device(e.g. desktop) using a USB stick.Double-click eGalaxTuner_BetaRelease.exe, then the screen below isshown. The sensitivity setting is for single touch only.Tool version1. Change the origin of Y2. Change the origin of X3. Swap X electrode and Y electrode(X coordinate and Y coordinate)4. Threshold value of X. Youcan change the value manually5. Threshold value of Y. Youcan change the value manuallySave the newparameter to thecontroller boardInitialise thefirmware to thedefault settingMeasure the straycapacitance with thechassis and re-set thefilter value automatically.Do not touch the sensorwhen executing it.Finish the tool
