Datalogic Touch TD1100 series Quick Reference Manual

Also see for Touch TD1100 Family: Product reference guide Quick reference guide

Contents

Datalogic Touch TD1100 series Quick Reference Manual Manual pdf 22 page image

LED and Beeper Indications14 Touch TD1100LED and Beeper IndicationsThe reader’s beeper sounds and its LED illuminates to indicate various functions or errors onthe reader. A “Green Spot” also lights to indicate a good read. The tables below list theseindications. One exception to the behaviors listed in the tables is that the reader’s functionsare programmable, and may or may not be turned on. For example, certain indications, suchas the power-up beep can be disabled using programming bar code labels. Reference thePRG for a more detailed list.Indication LED BeeperPower-upLED flashes/blinks on power-up,however, this may be too rapid toview. With a USB interface, the LEDblinks until enumeration with thehost is completed.Reader beeps four times at high-est frequency and volume uponpower-up.Good Read LED behavior for this indication isconfigurable using the PRG.One beep at current frequency,volume, mono/bi-tonal settingand duration upon a successfullabel scan.ROM Failure 200ms on / 200ms off Reader sounds one error beep athighest volume for 200 mS.Limited Scanning LabelRead N/AReader 'chirps' six times at thehighest frequency and currentvolume.Reader Disabled The LED blinks continuously 100mSon / 900 mS off N/A