BATTERIES AND MAINTENANCE1122 BATTERIES AND MAINTENANCERechargeable backup batteries and battery packs are not initiallyfully charged. Therefore the initial operation to perform is to chargethem. See below.NOTEBy default, the battery pack is disconnected at the factory to avoiddamage due to excessive draining.NOTEAnnual replacement of rechargeable battery pack avoids possiblerisks or abnormalities and ensures maximum performance.CAUTION2.1 CHARGING THE BATTERY PACKThe battery pack autonomy varies according to many factors, suchas the frequency of barcode scanning, RF usage, battery life,storage, environmental conditions, etc.NOTEThe battery icon on the Taskbar indicates when the battery pack is low.It is possible to recharge the battery pack by connecting the power supply directly tothe Falcon X3+.Alternatively, it is also possible to recharge the battery pack by inserting the FalconX3+ into the single slot dock or the multi battery charger.Moreover recharging is possible by USB Direct connection with the host computer,but with longer charging times and only if the mobile computer off.During the charging process the LED positioned at the right side of the display is redconstant. Once the charging process has been completed this LED is greenconstant.
