Datamax DGL Programmer's Reference Manual
                                                        | |
Contents
| 
22Chapter 2the pre-printed data.) The ‘C’ command instructs the printer to print labelformats nnnn units to the right of the position that the format specifies.c - Set Cut By AmountThis command is the same as the ‘:’ command except only a two-digit valuecan be entered. This command allows a predetermined number of labels tobe printed before a cut is made. 1 to 99 labels may be printed before a cut ismade.D - Set Dot Size Width and HeightThis command is used to change the size of a printed dot, hence the printresolution – dots per inch (DPI) of the printhead. By changing the height of adot, the maximum length of a label can be increased or decreased.E - Terminate Label Formatting Mode and Print LabelWhen the printer is processing Label-Formatting Commands and receives an‘E’ command, it will immediately print a label based upon the data received atthat point. Even if no printable data has been received, the printer willgenerate and feed a label (other termination commands are ‘X’ and ‘s’).Commands sent to the printer after a “terminate label” command must beStatus and Control, System-Level or Font Download type.F - Advanced Font AttributesThese commends extend the text presentation capabilities for Scalable Fonts.The format attribute allows a set of label format records to select Bolding,Italicizing and Underlining. Additional commands allow the specification of linerotation and font changes within a label field.FB +/- Turns Bolding on or offFI +/- Turns Italicizing on or offFU +/- Turns Underlining on or offFPn PointsSpecify the vertical point size of the following text relative to the base line.FSn PointsSpecify the horizontal point size of the following text relative to the base line.G - Place Data in Global RegisterThe ‘G’ command saves the print data of a print format record in a globalregister (temporary storage). This data may be retrieved and copied toanother record in the same label format using the special Label-FormattingCommand, |
manualsdatabase
Your AI-powered manual search engine