Datamax I-class Maintenance Manual

Also see for I-Class: Programmer's manual Operator's manual User manual Operator's manual Installation and operating instructions

Contents

Datamax I-class Maintenance Manual Manual pdf 18 page image

Adjustments and Maintenance2-8Step Action Displayed Message Comment17After all entries have beenmade, press the Keyto back out of the menu andthen press the Key tosave the settings whenprompted.Load media. Position the MediaSensor.SAVE CHANGES?ENTER KEY = YESPress and hold theKey until at leastone label advances. Note: If the Advanced Entry Calibration is unsuccessful, enter MEDIA SETTINGS / CALIBRATION/ ADVANCED ENTRY / SENSOR GAIN and lower the selected Gain Number by one. Selectthe new Gain Number then save the changes and exit the menu. Retest your media. Ifunsuccessful, repeat the procedure until a usable gain is obtained.2.2 Printhead AdjustmentsTo ensure even and consistent print quality across a wide range of media types and sizes, theprinthead is adjustable.2.2.1 Leveling Cam AdjustmentThe Leveling Cam ensures that even pressure is maintained across the label. Whenever using mediathat is less than the full width of the platen, proceed as follows:1. Load the printer with media. Download a label format or choose a Quick Test Label and beginprinting.2. While observing the right side of the label, rotate the Leveling Cam clockwise, or counter-clockwise, until even print is achieved across the width of the label (see examples below).