Datamax ST-3210 Operator's Manual

Also see for ST-3210: Quick start guide Operator's manual Programmer's manual Quick reference guide

Contents

Datamax ST-3210 Operator's Manual Manual pdf 55 page image

S-Class 474.4.5 Interior CleaningRequired for ST Models onlyOver time particles of ticket stock accumulate inside the printer. Theseparticles can stick to the ticket and cause voids in the print. Clean theinterior of the printer as follows:n Turn ‘Off’ and unplug the printer. Raise the access cover; seeSection 3.2.o Slide the printhead latch to the ‘unlocked’ position, raise theprinthead assembly (see Section 4.4.1), and remove the ticket stock.p Using a soft brush or compressed air, remove all debris from insidethe ticket compartment.q Lower the printhead assembly and slide the printhead latch into the‘locked’ position.r Plug in and turn ‘On’ the printer. Load ticket stock (see Section 3.2)and close the access cover. This completes the procedure.