Datavideo DN-200 Instruction Manual

Datavideo DN-200 Instruction Manual Manual pdf 7 page image

7Connections & ControlsFront Panel1. Menu Button - Calls up the menu display which is navigated using buttons 6 & 7.2. Display Panel - Displays the status and set up of the DN-200 unit or if the MenuButton is pressed the DN-200 Menu options.3. Play / Pause Button - Starts playback of a track, or pauses playback of a track withthe current status shown on the Display Panel. Also Starts / Pauses a recording whenthe unit is in Record mode.4. Stop Button - Stops playback or record.5. Record Button - Puts the DN-200 into Record Mode. To start recording press theRecord Button and the Play Button simultaneously. The unit will not record if novideo signal is present.6. Navigation Button – Used to navigate the menus and confirm set up choices.7. Navigation Button – Used to navigate the menus and confirm set up choices.DN-200 Clip Status Display Explained1. Sync to Tape Indicator OFF=ST0 and ON=ST12. Analogue / Digital Source indicator3. Loop Playback indicator4. Remaining Recording Space in Hours and Minutes5. Current Bin and Clip6. File type indicator7. Current Time Code or total length of clip8. Menu options9. Record, Pause, FFWD, REV and Playback indication