Datavideo GO 500 REPLAY Instruction Manual

Also see for GO 500 REPLAY: Instruction manual

Contents

Datavideo GO 500 REPLAY Instruction Manual Manual pdf 8 page image

8How to Connect Internal CablesCable requirements: Cable No. 1-5: DC Plug Cable built into the RMK-6 （1 & 2: 85CM，3 & 4 & 5：45CM） Cable No. 6: HDR-10 Power Cable (40 CM) Cable No.7: HDR-10 DC Power Cable (40 CM) Cable No. 8: RMC-400 DC Power Cable (100 CM) Cable No. 9: HDMI Cable (100 CM) Cable No. 10: DC Plug to Mini-Din Cable Cable No. 11: HDMI Cable(50CM) Cable No. 12: HDMI Cable (100CM) Cable No. 13: HDMI Cable (50CM) Cable No. 14: HDMI Cable (100CM) Cable No. 15: BNC 180 Degree Cable (50CM) Cable No. 16: BNC 180 Degree Cable (50CM) Cable No. 17: USB Type A to USB Type A Cable(180CM) Cable No. 18: USB Type A to USB Type A Cable (180 CM) Cable No. 20: HDMI Cable (100CM)1. Please connect one end of the Cable No. 7 (HDR-10 DC Power Cable) to the second powerinterface (DC OUT 12V) from the right side on the bottom side of the alumimum power boxmodule rear panel. After that, please connect another end of the cable to the DC IN 12V powerinterface on the rear panel of the HDR-10.7