Datavideo HDR-45 Quick Start Manual

Datavideo HDR-45 Quick Start Manual Manual pdf 38 page image

37SpecificationsInputs Interface • 1x BNC connector for HD/SD-SDI input• 2x XLR connector for audio inputOutputs Interface• 1x BNC connector for HD/SD-SDI pass through output• 1x BNC connector for SDI output• 1x HDMI connector for HDMI output (1.1)Record format• Video：MPEG2 (.M2T)• Audio：MPEG1 Layer2• Audio Bit rate：384Kbps• Audio Resolution：16bitOther Interface• 1x Mini XLR connector for GPI remote control• 1x D-Sub(9 Pin) for RS-422 or RS-232 either one• 1x IEEE-1394 Port for connection to PC, MAC and HDV device.• 1x Phone plugs for audio monitor outputVideo Input • HD (1080i/50 - 1080/59.94i – 720p/50 – 720/59.94p)• SD (480/59.94i, 576/50i)HD SDI signalSMPTE 292 standard complied with• Output return loss : More than 15 dB (5MHz to 750MHz)More than 10 dB (750MHz to 1.5 GHz)• Output level : 0.8 Vpp ± 10%• Rise time : Less than 270 ps• Fall time : Less than 270 ps• Difference between rise time and fall time within 100 ps• Alignment jitter : Less than 0.2 UI• Timing jitter : Less than 1.0 UI• Eye aperture ratio : More than 90%• DC offset : 0 ± 0.5V• Equalizer use 5C-FB cable support 100 metersSD SDI signalSMPTE 259M standard complied with• Output return loss : More than 15dB(5MHz to 270MHz)• Output level : 0.8Vpp ± 10%• Rise time : less than 1.5ns• Fall time : less than 1.5ns• Difference between rise time and fall time less than 0.5ns• Jitter less than : 0.2 UIAudio• Bandwidth 20~20KHz < +/- 3dB• S/N Ratio > 70 dB• THD. < 0.1%Operating Temperature • 0°C to 40°C (32°F to 102°F)Humidity • 10% to 90% (non condensing)Dimension & Weight • 211mm (W) x 280mm (D) x 97mm (H) / 3KgsPower • Input AC 100 ~ 240V Switching Adaptor, Output DC 12V / 3A

/ 39

Related manuals for Datavideo HDR-45