Datavideo HS-500 Instruction Manual

Datavideo HS-500 Instruction Manual Manual pdf 30 page image

BorderThese controls are used in conjunction with the Picture in Picture Effect and Wipe transition only, and canonly be activated when the Picture in Picture or Wipe control is active.8 Colors are available for the wipe border: black, blue, magenta, red, green, cyan, yellow and white. See“Background Color” below. (Wipe only). In PIP mode the border can only be white.BackgroundWhile not strictly an effect, these controls are in the same general area, and we thought you’d look here forany information you might need. These controls select what solid color the background will be when selectedon either the Main or Sub Video bus. There are eight possible background colors; see below, the LED lightsup in the selected color (except for black where the LED goes out), and it is indicated on the preview monitoroutput.The background colors are: black, blue, magenta, red, green, cyan, yellow, and white.Engage this control by pressing the button. The LED’s color will correspond with the background color(except black) to indicate that the controls are active. Repeated presses of the button select different colors.Sample applicationsThe best way to show off what the SE-500 can do is to give you some examples of how it could be used inreal life situations. Each example refers to a block diagram for set up and connections.Each of these examples is meant to illustrate a typical type of use for the SE-500. Needless to say, there willbe many variations on any of these themes. Try to look for the principles of each set up and adapt these toyour particular situation.29