Datavideo HS-600 Instruction Manual

Also see for HS-600: Instruction manual

Contents

Datavideo HS-600 Instruction Manual Manual pdf 47 page image

47System InformationThe System Information Menu displays the Firmware Version of the monitor, and offers a Factory Reset option,which will return all the settings of the monitor to the factory defaults.To access the options for the selected setting press ENTER again, so that the option column is highlightedUse the Up / Down buttons to navigate the available options.You can choose: Black Light 1=Dark (Min) 12=Bright (Max)Factory Reset Yes / NoFirmware version 170H-110729-LPanel Resolution 1600x900To Factory Reset the monitor press the ENTER button, so that Factory Reset is highlighted, and then pressENTER again to highlight the option. Use the UP / Down button to select YES from the options and then pressENTER to reset the monitor. After a few seconds the monitor will be reset.RS-422 ProtocolThe HS-600 can be controlled remotely by computer using the RS-422 protocol for the SE-600 switcher. This is aprofessional feature that requires programming and/or prior experience. Your dealer or local Datavideo office cansupply you with a copy of the separate RS-422 Protocol document which has been written with experienced systemintegrators and programmers in mind. Please note Datavideo cannot offer training or bespoke software in regard tothis feature.DimensionsAll measurements in millimetres (mm).

/ 50

Related manuals for Datavideo HS-600