Datavideo RMC-190 Quick Start Manual

Contents

Datavideo RMC-190 Quick Start Manual Manual pdf 12 page image

11range, the system will show “ERROR”. After the setting is entered,press ENT key to confirm3. After the camera ID is selected, the user will be automatically enteredthe protocol option; move the joystick up / down the protocol optionto select either PD or V and right move the joystick to set the desiredprotocol4. Baud rate setting: After setting the protocol, move the joystick up /down the baud rates; to select a baud rate, right move the joystick orpress ENT to confirm5. Address Setting: This option appears after the baud rate is selected.Input a number to set camera address (range from 1~7). Press ENT toconfirm.6. The system returns automatically to the main menu after the camerasetting is finished.b. Time SettingSet time in 24-hour format.1. Move the joystick up / down the main menu to the “TIME SETTING”option2. Right move the joystick or press ENT to enter the “Time Setting”option. Once in “Time Setting”, “HH” hour field will be enabled forediting; input number digits from keyboard or move joystick up / downto set the “HH” value (range is from 0~23). If number digits are enteredfrom number keypads, “MM” minute field will be automaticallyenabled after the hour field has been successfully set. If “HH” numberdigits are set by the joystick, to move on to minute setting, right movethe joystick to enable “MM” minute setting. Move the joystick right /left to select from “HH”, “MM” and “SS” settings.3. To set “MM” and “SS” fields, repeat Step 24. Press ENT to save and return to Main Menu.c. Volume SettingThere are 6 volume levels available for selection.1. Move the joystick up / down the main menu, and select “ VOLUMESETTING” by right moving the joystick or pressing ENT to enter“VOLUME SETTING”2. In this option, the user is allowed to either turn off the volume or setthe volume level by right moving the joystick on the desired option orpress ENT to confirm.d. Backlight SettingBacklight mode allows the keys to be clearly illuminated even in a very darkenvironment.1. Move the joystick up / down the main menu and select “BACKLIGHTSetting” by right moving the joystick or pressing ENT to enter“BACKLIGHT Setting”.2. Move the joystick up / down the options list and set the backlight toAUTO, ON or OFF by right moving the joystick or pressing ENT toconfirm.