Datavideo SE-2800 Instruction Manual

Also see for SE-2800: Instruction manual Instruction manual Quick start guide

Contents

Datavideo SE-2800 Instruction Manual Manual pdf 34 page image

34How to update the SE-2800 FirmwareFrom time to time Datavideo may release new firmware to fix reported bugs in the current SE-2800 firmware or toadd a new feature. Customers can update the SE-2800 firmware themselves if they wish or they can contact theirlocal dealer or reseller for assistance should they prefer this method.This page describes the firmware update process for the complete unit, if you have all the items required it shouldtake approximately 1 hour 20 minutes total time to complete.Once started the update process should not be interrupted in any way as this could result in a non-responsiveunit.As well as a working SE-2800 you will need: The latest Firmware update file for the SE-2800.This can be obtained from your local Datavideo office or dealer. The SE-2800 power supply. The SEConfig software supplied with the switcher. A Windows 7 computer with an Ethernet port. An Ethernet cable.To update the SE-2800 firmware:1. Switch off or shut down the SE-2800 and Computer in the normal way.2. Connect the Ethernet cable between the SE-2800 rear panel and the Windows 7 Computer.3. Turn on the Windows 7 Computer.4. Unzip the firmware update folder to the Computer Desktop so the file within it is easy to locate.5. Double click the firmware update icon to launch the Flash Update Utility.6. Confirm the supported devices list says SE-2800 then click NEXT.