Daval Technologies TELE-RECORDER DVTR-680 Owner's Manual
          | |
32. Press F.F. or REWIND button as required until “REC MODE” flashes.3. Press ENTER/INDEX button, “REC MOD:” will appear and the presentrecord mode, HQ, SP, or LP will flash.4. Press F.F. or REWIND button as required to select desired record mode.Press ENTER/INDEX button to confirm.5. “ MIC SEN” will flash, press the ENTER/INDEX button to enter menu orpress STOP button to return to idle mode.Setting Microphone SensitivityYour recorder has three preset microphone sensitivity set-tings. Medium (MI) setting works well for most recordingsituations.1. If sound source is loud or located near recorder, use low (LO) setting.2. If sound source is low or located away from recorder, use high (HI) setting.3. Press and hold MENU/FOLDER button until “DATE/TIME flashes.4. Press F.F. or REWIND button as required until “MIC SEN” flashes.5. Press ENTER/INDEX button, “MIC SEN:” will appear and present recordmode (LO, MI, or HI) will flash.6. Press F.F. or REWIND button as required to select desired microphonesensitivity.7. Press ENTER/INDEX button to confirm, “PLAY MODE” will flash. PressENTER/INDEX button to enter menu or press STOP button to return toidle mode.Setting Playback ModeSet recorder to playback either one recording or all recordings in folder.1. Press and hold MENU/FOLDER button until “DATE/TIME” flashes.Normal/Hold SwitchThe NORMAL/HOLD switch is located on left side of the recorder. It preventsthe recorder control buttons from being accidentally pressed when it is inyour pocket or brief case.1. Set NORMAL/HOLD switch located on leftside of recorder to HOLD position.2. The HOLD icon will be displayed. When PLAY button is pressed,“LOCK: ON” will be displayed briefly.3. Return NORMAL/HOLD switch to NORMAL position to resume normalrecorder operation.Idle Mode Display InformationYour recorder will display battery status, folder number and number of re-cordings, recording mode, MIC sensitivity, playback mode, VOX status, andcurrent time when recorder is in idle mode.1. Press DISPLAY button to display year and date.2. Press and hold STOP button to display the total number of files in thepresent folder and the remaining recording time.3. The idle mode information is displayed for approximately thirty (30) sec-onds after the last button is pushed.Selecting Record FoldersThe recorder has five recording folders, each capable of storing 99 re-cordings.1. Press MENU/FOLDER button as required to select desired folder prior tomaking or playing back recordings.Operating InformationESetting Year/Date/TimeWhen batteries are first installed or replaced, the current year, date and timemust be entered into the recorders memory. Start entering within 15 secondsor the display will return to idle mode.1. Press and hold MENU/FOLDER button until “DATE/TIME” flashes.Press ENTER/INDEX button, “01M01D’06Y”, will appear.2. The last three digits “06Y” (year digits) will flash. Press F.F. or REWINDbutton as required to enter current year.3. Press ENTER/INDEX button to confirm,“01M” (month digits) will flash. Press F.F. or RE-WIND button as required to enter current month.4. Press ENTER/INDEX button to confirm, “01D” (daydigits) will flash. Press F.F. or REWIND button asrequired to enter current day.5. Press ENTER/INDEX button to confirm, the“12:00 AM” (hour digits) will flash. Press F.F. or REWIND button as re-quired to enter current hour.6. Press ENTER/INDEX button to confirm, the “01” (minute digits) willflash. Press F.F. or REWIND button as required to enter current minute.7. Press ENTER/INDEX button to confirm, “RECORD MODE” will flash.Press ENTER/INDEX button to enter menu or press STOP button toreturn to idle mode.Setting Recording ModeDepending on your recording requirements, select one of three recordmodes.HQ: provides best sound quality with about 120 minutes of recording time.SP: provides average sound quality with about 340 minutes of recording time.LP: provides less sound quality with about 880 minutes of recording time.1. Press and hold MENU/FOLDER button until “DATE/TIME” flashes.IMPORTANT SAFETY INFOR-MATION You can use a ListedDirect Plug-In AC Power Unit (notsupplied) marked “Class 2 (Classe) 2”that must be rated at 6VDC@300mA with positive center tipoutput plug. Plug dimensions are10 mm plug length, 5 mm OD, and2 mm ID. Using an AC power unitthat does not meet these specifi-cations could seriously damagethe recorder. The correct orienta-tion for the ac power unit is in avertical or floor mount position.FOR USACAUTION: Use only with Class 2 power source listed to UL1310 that sup-plies 6 VDC 300 mA - +For CanadaCAUTION: Use only with Class 2 power source, listed to CAN/CSA C22.2No.223, that supplies 6VDC 300mA - +Utiliser uniquement une alimentation de classe II, listée dans CAN/CSAC22.2 No.223, qui fournie 6V, C.C. et 300 mA.You can purchase a DC adaptor through service center or retailer shop. Forservicing or replacement please contact us for suitable DC adaptor.Vous pouvez acheter un transformateur C.C. par le service central ou lemagasin du distributeur. Contacter nous S.V.P. pour entretenir ou remplacervotre transformateur C.C. de façon convenable.Daval Technologies LLCPO Box 27Chappaqua, New York 10514Tel: 914-251-9220USB(PC)DC 6VTELEPHONE HANDSETIN OUTDAVAL TECHNOLOGIESMADE IN CHINABATTERY/BATTERIEDC 1.5Vx2 ANSI AAAIEC/JIS LR03(R03) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine