David Clark 9100 SERIES Installation & Operation Manual
Also see for 9100 SERIES: Maintenance manual
                                                       | |
Contents
| 
419549P-31 (04-17)3. Mounting EndpointsParts/Tools Requiredq U9100-series endpoint(s) (Headset Stations/Wireless Gateways)q M9110FM Flush-Mount Kit (44004G-02, optional)q Pencil/Penq Drillq 13/32-inch Drill Bitq #8 Mounting Screws (customer supplied)q Nuts (customer supplied)q Lock-washers (customer supplied)ProcedureLocation ConsiderationsSelect a location on a flat surface that is out-of-the-way, and provides adequate room to attach allcables. The U9100-series endpoints are immersion-proof (IP67). However where possible themounting location should be chosen to minimize direct exposure to the elements.Alternately, the endpoints may be flush-mounted with the optional flush-mount kits:• M9110FM, 44004G-02 (with plate)• 44004G-03 (without plate)Mountingq Position the endpoint on the surface to be mounted and mark the (4) hole locations.q Drill the (4) holes with 13/32-inch drill bit.q Mount the endpoint with #8 mounting screws and nuts/lock-washers (customer supplied). |
Related manuals for David Clark 9100 SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine