Davis Instruments Energy EnviroMonitor User Manual
Also see for Energy EnviroMonitor: Installation manualSystem installation guide
                                                               | |
Contents
| 
Using the Energy EnviroMonitorPage 16 Energy EnviroMonitor ManualEntering Negative NumbersIf you want to enter a negative number, first enter the number without the neg-ative sign. Then press and release ENTER until the appropriate digit (the onewhere you want to place the negative sign) begins to flash. Hold ENTER as thisdigit cycles through the available entries, one of which will be a negative sign ifa negative entry is valid.Example of Using ENTER: Setting the TimeYou should use the following step-by-step example of using the ENTER key tohelp you better understand its use.1. Press TIME until the time display appears.2. Press UNITS to change from the 12-hour format to the 24-hour format, as desired.The 12-hour format is indicated by the symbol AM or PM. The 24-hour for-mat is indicated by the symbol 24HR.3. Press ENTER and hold it down.The two left hand digits, which represent the hour, will begin to flash andthen cycle through the possible entries. (Note that the two digits which rep-resent the hour are linked together when using the ENTER key.) If you areusing the 12-hour format, the digits cycle from 12 AM to 11 PM. If you areusing the 24-hour format, the digits cycle from 0 to 23.E NTERING THE H OUR D IGITS4. Release ENTER when the correct entry appears.5. Press and release ENTER to move to the next digit, the “tens” digit.The “tens” digit begins to flash.6. Press and hold ENTER down.The “tens” digit will begin to cycle through the possible entries (0 to 5).E NTERING THE “T ENS ” D IGIT7. Release ENTER when the correct entry appears. |
Related manuals for Davis Instruments Energy EnviroMonitor
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine