DaySequerra M4DDC User Manual
                               | |
Contents
| 
29M4DDC User ManualWebserver – Logging TabA log of TimeLock TM , Level Lock, Audio Phase, and Alarms may be exported in .csv format to an FTPsite for download. Data is only logged if it crosses beyond the threshold limits that are set in the ‘LogThreshold’. Audio Phase and Alarms are always logged and do not have a threshold. Log categoriescan be selectively enabled and disabled. Data is stored in a buffer until the set limit (KB) is reached.The buffer will then upload the log to the defined FTP ‘Log Directory’. The unit will not log data unlessthe Log Directory is enabled. An ‘Upload Log Now’ button is available to quickly upload any data that isstored in the buffer to the directory. Each time this action is performed the log starts over. Logs aresaved with a timestamp, Device name and serial number.Example of Log Condition > Enable - TimeLock TM . Setting the pull-down menus for each as follows:Samples (pre) 50, Samples (post) 3. Considering the M4DDC is set to correct diversity delay. Pre andPost correction data is compared to the threshold for each set in the Log Threshold. Pre correctiondiversity delay that exceeds 50 samples will be logged. If the delay drifts back and forth from 50 it willSaves the log to FTP every (x)KB before clearing the bufferand starting over again.TimeLock TM, Level Lock, Audio Phase,and Alarms must be enabled to log.TimeLock TM and Level Lock will onlylog data that reaches the setconditions. |
Related manuals for DaySequerra M4DDC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine