DaySequerra NLC5.1ST User Manual
                                | |
28 NLC5.1ST User ManualFirmware UpdateProvided that you have completed warranty registration for your NLC5.1ST on our website, we willnotify you as new firmware updates become available. The notification will contain the announcementof new firmware, issues corrected, and instructions on how to retrieve the update files.Update packages will be available as a single .ZIP file for download. Compatible archive programsinclude Winzip (www.winzip.com) or WinRAR (www.rarlabs.com) and may be downloaded from theirrespective websites. The update package will contain four files; dsp2505.bin, firmdown_ds.exe,readme.txt and update.bat.Firmware updating is accomplished via UDP Port 44600. At this time, updating is only supported byusing a cross-over cable directly connected to one PC. If your PC has multiple network interfaceadapters, each additional adapter will need to be disabled before attempting to upgrade your unit. Youmay also wish to disable your firewall during the upgrade process. For additional support withnetworking, please contact your network administrator.DO NOT UNPLUG THE UNIT OR TURN OFF YOUR PC WHILE THE FLASH IS IN PROGRESS. If theflash procedure is interrupted before it can complete, NLC5.1ST may be left in an un-usable state andwill need to be returned for factory service.Please follow these steps to upgrade your unit, unless directed otherwise from DaySequerra:1. Un-Zip the files using a compatible utility that can handle ZIP archive file format into a newempty directory on your PC.2. Disable any additional network interface adapters present on your PC. Go to Control Panel,then Network Connections. Right click on the adapter to be disabled and select Disable.3. Unplug your PC from the network it is currently connected to.4. If your PC’s network interface is set up for DHCP, disable it and enter a static IP address. Whilein Network Connections under Control Panel, right click on the network interface and selectProperties. Select “Internet Protocol (TCP/IP)” and press the Properties button. On the generaltab of the dialogue box, select “Use the following IP address”. Enter an IP address in the box “IPAddress” within the local network range. (Example: 192.168.0.1) Click in the “Subnet mask” boxand it should auto populate with 255.255.255.0. Select OK to close the dialog, then OK to closethe properties box.5. Power down NLC5.1ST and power up again while holding the ENTER key. NLC5.1ST will entersafe mode.6. If NLC5.1ST is set up for DHCP, disable it and enter a static IP address within the local networkrange. (Example: 192.168.0.2) Details are available in the NETWORK section of this manual.7. Connect the NLC5.1ST to the PC using a crossover Ethernet cable.8. When Windows has acknowledged the Ethernet connection, you may start the update progressby double clicking on upgrade.bat. NLC5.1ST should download the new firmware and reboot.9. Disconnect the cross-over cable and return your PC and NLC5.1ST to their original networkconfigurations. |
Related manuals for DaySequerra NLC5.1ST
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine