Daybreak Fitness Daybreak 408 WLHS43081 User Manual
                    | |
12Console DiagramUSING THE CONSOLERefer to the console diagram above. The function ofeach console control is explained below:Air Control: Determines the amount of air that is inthe spa jet system during operation. If the control isturned to the left, the amount of air flowing throughthe jets will increase. If the control is turned to theright, the amount will decrease.On/Off Button: Turns the spa on and off. When youfirst press the on/off button, the spa jet unit will run atlow speed, providing gentle hydrotherapy. Press thebutton again and the spa will run at high speed, pro-viding more intense hydrotherapy. Press the button athird time, and the spa will shut off.The spa also features an automatic mode which heatsand filters the water when the spa is left unattended.When the spa is first plugged in, or if the buttons onthe console have not been used for longer than twen-ty minutes, the automatic mode will begin filtering orheating the water, as needed. Note: To keep the fil-ter and heat cycles from running, the power cordmust be unplugged.Thermostat: Controls the temperature of the water.The water heats at about 1.8°F an hour with the coveron. The thermostat can be set to heat the water from70°F to 104°F. You should use a medical or otheraccurate thermometer to check the temperature of thewater.ThermostatOn/Off ButtonAir Control |
Related manuals for Daybreak Fitness Daybreak 408 WLHS43081
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine