52Issued: 28.02.2005Strider MD 4 Plus1.Remove the seat unit.2.Remove the rear panelling.3.Remove the batteries.4.Fold the tiller down.5.Disengage the drive unit from the chassis.In just a few steps you can dismantle theStrider down to the following components tomake it ready for transport:1. Chassis2. Batteries3. Drive unit4. Rear panelling5. Seat unit13.3.1 Working step summary13.3.2 Removing the seatClamping and crushing hazard!Increased hazards due to clamping or crushing result due to thehigh component weight (such as batteries) during preparation fortransport.• Always carry out any work to be done with great care.• Always try to get help from a second person, especially whenstowing parts for transport.13.3 Preparation for transport - separating componentTilt the backrest forwards.First pull out the locking device (1) andthen fold the backrest forward (2).➨Tilt the backrestforwards
