Dazzle Digital Media HS Reader/Writer User’s Guide • Getting Started • Page 16Installing the Software On a MacintoshTo begin using your Digital Media HS Reader/Writer with a Macintosh computer (Mac OS9.x or higher required), you do not need to install any software. Simply connect the reader/writer to your Mac’s USB port as described below, insert your media card, as described inthe section “Using the Digital Media HS Reader/Writer beginning on page 18, and accessthe media, as described on page 30.The Dazzle Installation CD includes the following Macintosh software components:• Adobe Acrobat Reader (required for electronic documentation)• Dazzle Technical Resource Center Information*• Dazzle Products Demo Clips• Dazzle Online Registration (English only)• Electronic user’s guide (English only)*You can also find information on Dazzle’s North American and European TechnicalResource Centers on page 42 and page 43 respectively.To access any of the included software components, insert the Dazzle Installation CD inyour Mac’s CD/DVD-ROM drive, and then open the corresponding file or folder. To installAdobe Acrobat Reader 5, open the Acrobat Reader 5.05 folder on the Dazzle InstallationCD, double-click the Acrobat Reader Installer icon, and follow the screen instructions.Installing the Hardware on a MacintoshYou can connect your Digital Media HS Reader/Writer to computers with USB 1.1 or USB2.0 ports. Computers with USB 2.0 ports transfer data at a much faster rate than comput-ers with USB 1.1 portsConnecting to a Macintosh USB PortConnect the USB cable (attached to the back of the Digital Media HS Reader/Writer) tothe USB port on your Macintosh. Be sure the cable is properly aligned before connectingand do not force the connection.Connect USB cablefrom Digital MediaReader/Writer directly toUSB port on yourMacintoshDigital Media HS Reader/Writer