Dazzle ZiO! Hi-Speed Portable Reader/Writer User’s Guide • Using the Reader/Writer • Page 24Inserting a Memory Stick CardBefore you insert a Memory Stick card in the ZiO HS Reader/Writer, position the unit withthe Access Indicator on top, as shown below. Then flip its protective ring to the openposition to uncover the USB connector and the card slot and convert the ring to a stand,as described in “Hardware Overview” on page 7. If you plan on writing to or deleting fromyour Memory Stick card, make sure the card is not locked (see the illustration below).MagicGate secure mode is not supported.To insert a Memory Stick card, follow these steps:1. Position the Memory Stick card in the direction shown in the illustration below.2. Insert the Memory Stick card with the gold contacts facing down (you should not seethe gold contacts when inserting the card).Caution: Notice the rounded corner of the Memory Stick card and be careful not toinsert the card in the wrong direction. To insert properly, be sure you position the cardwith the rounded corner at the top left side.3. Gently push the card all the way into the slot until it locks in place.Important: If excessive force is required, or the card just doesn’t seem to fit, do notforce the card in the ZiO HS Reader/Writer. Contact the Dazzle Technical ResourceCenter for assistance.MEMORY STICK8MBLOCKRounded cornerat top left sideLock Tab(located onbottom of card)Access Indicator (on top)