De Nora Capital Controls 71V3B Series Instruction Manual
                                            | |
Contents
| 
115.6031.0 - 26 -The controller has three menus (Operation, Regulation and Initial Setting). Normal operation will be in theInstruction Menu.Figure 10 - Temperature Controller Controls & Indicators (LOVE Controller)3.6.1 Changing the Temperature SetpointThis procedure can only be achieved with lockout or no lockout in effect. The controller'sSetpoint temperature may be adjusted using the following front-panel keys:RAISE KeyLOWER KeyWhen in the Operation Mode:- Momentarily depressing either key will increment or decrement the display one degree.- Depressing and holding either key will increment or decrement the display automatically.- Depressing and holding either key more than 2 seconds will automatically increment ordecrement the display at an increased rate.- The new setting will flicker.- Depress (the Enter Key) to save the new setting.WATER BATH TEMPERATUREHEATER "ON" INDICATION ALARM 1HIGH TEMP ALARMAUTO TUNE (NOT USED)INDEX: Pressing the INDEX key advances the display to the next menu item.WATER BATH TEMPERATUREALARM 2LOW TEMP ALARMDOWN ARROW: Decrements a value or changes a menu item.If pressed during the Operation Mode, the set point value will bedecreased.UP ARROW: Increments a value or changes a menuitem. If pressed during the Operation Mode, the setpoint value will be increased.ENTER: Stores the value or item change. If not pressed, the previously stored value oritem will be retained. When pressed during the Operation Mode, the controller switchesto the Regulation Mode. If held for more than 3 seconds during the Operation Mode, thecontroller switches to the Initial Setting Mode. If pressed during the Regulation Mode orInitial Setting Mode, the controller will return to the Operation Mode.WATER BATH TEMPERATURESET POINT ORPARAMETER INDICATION |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine