--Driver Installation1. After installation of the device, and after start of Windows the Hardwarewizard appears.2. Put the driver CD in the CD ROM drive.3. Choose the option "Install software from a list or from another source" andclick on "next".4. At the point "Search also the following sources", click "browse" and choosethe path: “CD-ROM\JMicron\JMB360_363\Win 2K_XP\X32“ and click on"next".5. The driver will be found and installed. Click on "Finish".6. Restart your PC.7. After restart you can start using the device immediately.Support DelockIf you have further questions, please contact our customer supportsupport@delock.de / www.delock.com or phone0700 - DELOCKGE (0700 - 335 625 43).You can contact our service hotline during the following times:Mon – Fri: 9:00 – 17:30 pm charge 0,12 € / min** A connection fee applies according to fee schedule of Deutsche Telekom AGor your local telephone provider.All callers outside of Germany dial please 00493081789324You can find current product information on our homepage:www.delock.comFinal clauseInformation and data contained in this manual are subject to change withoutnotice in advance. Errors and misprints excepted.CopyrightNo part of this user manual may be reproduced, or transmitted for any purpose,regardless in which way or by which means, electronically or mechanically,without explicit written approval of Delock.Edition: 06/2006