4OPERATION AND USE1) SETTING THE CLOCKFor the first time, set the clock to the correct time, proceeding as follows:• Press the button “hour” until the display shows the hours for the correct time,then release the button.• Press the button “min” until the display shows the minutes for the correct time,then release the button.When setting the correct time, the numbers will flash on the display.The flashing of the numbers will continue for a few seconds after the adjustment hasfinished then stop on the correct time and the clock start working.To change the time, press pushbuttons “hour” or “min” for at least 5 seconds, thenproceed as above to modify both hours and minutes.2) MANUAL FUNCTIONINGTo operate the appliance in “manual” mode, press the “ON MODE” button.To set the required power level, proceed as follows: press the “ON MODE" button, and thenpress again one or more times within 5 seconds to select the power level, as per the fol-lowing sequence:Maximum powerMedium powerMinimum powerOffAt any time during “Manual” operation, pressing the “ON MODE” button oncewill display the previously set power level for 5 seconds; after this 5 second period,the display will return to show the current operating power.If Maximum power has been selected, adjust the “+” or ”-” button to the desired comfort tem-perature, from 42 to 95°F (5 to 35°C). By pushing once the “+” or “-” button the desiredtemperature (shown on the right side of the display) will increase or decrease of 1°F. Keeppushbutton pressed to move through the temperature in fast mode.correct time°FMANAM0: Set temperature°FMANAM:°FMANAM: °F°FMANAM:°FMANAM0:°FMANAM: set temperaturecorrect timeGB 23-03-2004 16:21 Pagina 4