DeLonghi CGH Series Manual

Contents

user maintenance

2ELECTRICAL CONNECTION (UK ONLY)The flexible mains lead is supplied connected to a B.S. 1363 fused plughaving a fuse of 13 amp capacity.Should this plug not fit the socket outlets in your home, it should be cut off and replaced with asuitable plug, following the procedure outlined below. Note: Such a plug cannot be used for any other appliance and should thereforebe properly disposed of, (having removed the fuse) and not left where children might find it and plug it into a supply socket - with theobvious consequent danger. If the plug is a moulded-on type the fuse cover must be refitted. If the fuse cover is lost, the plug must notbe used until a replacement cover is obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the baseof the fuse recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover. N.B. We recommend theuse of good quality plugs and wall sockets that can be switched off when the machine is not in use. important: the wires in the mainslead fitted to this appliance are coloured in accordance with the following code:As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying theterminals in your plug, proceed as follows:The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or bythe earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminalwhich is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which ismarked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal.Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you arein doubt, consult a qualified electrician. Should the mains lead ever require replacement, it is essential that this operation be carriedout by a qualified electrician and should only be replaced with a flexible cord of the same size. Only 13amp replacement fuses whichare asta approved to B.S. 1362 should be fitted. This appliance conforms to the Norms EN 55014 regarding the suppression of radiointerference.green and yellowbluebrownearthneutralliveGreen and Yellow to Earth13 amp FuseBrown to LiveCord ClampBlue to Neutral