DeLonghi DE 91 GW Installation And Service Instructions Use And Care Instructions

10ANTI-TILT BRACKETImportant!To restrain the appliance andprevent it tipping accidentally,fit a bracket to its rear to fix itsecurely to the wall. Make sureyou also fit the supplied lockpin to the anti-tilt bracket.To fit the anti-tilt bracket:1. After you have located wherethe cooker is to be positioned,mark on the wall the placewhere the two screws of theanti-tilt bracket have to be fitted.Please follow the indicationsgiven in Fig. 8a.2. Drill two 8 mm diameter holesin the wall and insert the plasticplugs supplied.Important!Before drilling the holes,check that you will not dam-age any pipes or electricalwires.3. Loosely attach the anti-tilt brack-et with the two screws supplied.4. Move the cooker to the wall andadjust the height of the anti-tiltbracket so that it can engage inthe slot on the cooker’s back, asshown in Fig. 8a.5. Tighten the screws attaching theanti-tilt bracket.6. Push the cooker against the wallso that the anti-tilt bracket is fullyinserted in the slot on the cook-er’s back.7. Access the bracket and fit thelock pin:• Open the pivoting panel (Fig.8b).• Fit the lock pin through thebracket, as shown (Fig. 8c).• Close the pivoting panel.min 220max 245450 4500+ 25900 mm12Figure 8bOpening the pivoting panelFigure 8cFitting the lock pin throughthe bracketPivotingpanelFigure 8aFitting the anti-tilt bracketLock pincorrectlyfittedLock pinSlot on thecooker’s backCooker’sbackAnti-tilt bracketattached on therear wall