• USERS OPERATING INSTRUCTIONS• INSTALLATION ADVICE• IMPORTANT - PLEASE READ AND FOLLOWIMPORTANT - PLEASE READ AND FOLLOW✓ Before beginning, please read these instructions completely and carefully.✓ Do not remove permanently affixed labels, warnings, or plates from the product. Thismay void the warranty.✓ Please observe all local and national codes and ordinances.✓ Please ensure that this product is properly grounded.✓ The installer should leave these instructions with the consumer who should retainfor local inspector's use and for future reference.✓ The electrical plug should always be accessible.Installation must conform with local codes or in the absence of codes, the National FuelGas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with theNational Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:Installation must be in accordance with the current CAN/CGA-B149.1 National GasInstallation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.Electrical installation must be in accordance with the current CSA C22.1 CanadianElectrical Codes Part 1 and/or local codes.INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform withthe Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part280)] or, when such standard is not applicable, the Standard for Manufactured HomeInstallations, ANSI/NCSBCS A225.1, or with local codes where applicable.INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform withstate or other codes or, in the absence of such codes, with the Standard for RecreationalPark Trailers, ANSI A119.5.Installation of any gas-fired equipment should be made by a Iicensed plumber. A manualgas shut-off valve must be installed in the gas supply line ahead of the appliance in the gasstream for safety and ease of service.B U I L T - I N G A S O V E Nfor residential use onlyModels: DEBIG 24 SSDEBIG 24 WDEBIG 24 EDEBIG 24 SS model only: This built-in oven is supplied with a protective film on steeland aluminium parts. This film must be removed before installing/using the appliance.