IMPORTANT - PLEASE READ AND FOLLOW✓ Before beginning, please read these instructions completely and carefully.✓ Do not remove permanently affixed labels, warnings, or plates from the product. Thismay void the warranty.✓ Please observe all local and national codes and ordinances.✓ Please ensure that this product is properly grounded.✓ The installer should leave these instructions with the consumer who should retainfor local inspector's use and for future reference.✓ The electrical plug should always be accessible.Installation must conform with local codes or in the absence of codes, the National FuelGas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with theNational Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:Installation must be in accordance with the current CAN/CGA-B149.1 National GasInstallation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.Electrical installation must be in accordance with the current CSA C22.1 CanadianElectrical Codes Part 1 and/or local codes.INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform withthe Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part280)] or, when such standard is not applicable, the Standard for Manufactured HomeInstallations, ANSI/NCSBCS A225.1, or with local codes where applicable.INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform withstate or other codes or, in the absence of such codes, with the Standard for RecreationalPark Trailers, ANSI A119.5.Installation of any gas-fired equipment should be made by a Iicensed plumber. A manualgas shut-off valve must be installed in the gas supply line ahead of the appliance in the gasstream for safety and ease of service.If an external electrical source is utilized, the appliance, when installed, must be electrical-ly grounded in accordance with local codes or, in the absence of local codes, with thenational Electrical Code, ANSI/NFPA 70.This range is supplied with a protective film on steel and aluminium parts.This film must be removed before installing/using the appliance.FOR INSTALLER ONLYTHIS RANGE IS FOR RESIDENTIAL USE ONLY• INSTALLATION INSTRUCTIONSIMPORTANT - PLEASE READ AND FOLLOWGAS RANGEfor residential use onlyModel: DEFSGG 24 SS