DeLonghi DEGCT424FSS User Manual

Contents

DeLonghi DEGCT424FSS User Manual Manual pdf 16 page image

1612NATURAL GASREGULATIONLP/PROPANEREGULATIONASETTING THE PRESSURE REGULATOR (fig. 5.5)1. Unscrew the regulator cover;2. Unscrew the A component, reverse and screw it according to the LP/PROPANEregulation.CONVERSION TO LP/PROPANE GASEvery cooktop is provided with a set of injectors for the various types of gas.Select the injectors to be replaced according to the table below.The nozzle diameters, expressed in hundredths of a millimetre, are marked on thebody of each injector.Fig. 5.54. Rigid Pipe Connections:If rigid pipe is used as a gas supply line, a combination of pipe fittings must be usedto obtain an in-line connection to the cooktop. All strains must be removed from thesupply and fuel lines so cooktop will be level and in line.• Use joint compounds and gaskets that are resistant to action of natural or propanegas on all male pipe threads.• Do not over tighten gas fitting when attaching to pressure regulator. Overtightening may crack regulator.5. Leak Testing:IMPORTANT: Leak testing of the appliance shall be conducted as follows:• After final gas connection is made, turn on manual gas valve and test allconnections in gas supply piping and appliance for gas leaks with a soapy watersolution. During this test all appliance gas valves have to be closed.• In order to avoid property damage or serious personal injury, never use a Iightedmatch. If a leak is present, tighten joint or unscrew, apply more joint compound,tighten again and retest connection for leak.