13INSTALLATIONELECTRICAL REQUIREMENTS■ The appliance must be connected to the mains checking that the voltagecorresponds to the value given in the rating plate and that the electricalcable sections can withstand the load specified on the plate.■ The plug must be connected to an earthed socket in compliance with safetystandards.■ If the appliance is supplied without plug, fit a standard plug which issuitable for the power consumed by the appliance.■ The wires in the power cable are coloured in accordance with the followingcode: Green/Yellow = Earth, Blue = Neutral, Brown = Active.If the colours of the wires in the power cable to the appliance do notcorrespond with the coloured markings identifying the terminals in thejunction terminal, proceed as follows:1.The wire which is coloured green and yellow must be connected to theterminal marked E (Earth) or coloured Green.2.The wire which is coloured blue must be connected to the terminal markedN (Nuetral) or coloured Black.3.The wire which is coloured brown must be connected to the terminalmarked L (Live) or A (Active) or coloured Red.■ The appliance must be connected directly to the mains placing a two poleswitch with minimum opening between the contacts of 3 mm between theappliance and the mains.■ The power supply cable must not touch the hot parts and must bepositioned so that it does not exceed 50°C above ambient.■ Once the appliance has been installed, the switch or socket must always beaccessible.■ If the supply cord is damaged it must be replaced by the manufacturer or it’sService Agent or a similarly qualified person in order to avoid a hazard.N.B. The connection of the appliance to earth is mandatory.If the installation requires alterations to the domestic electrical system call a qualified elec-trician.He should also check that the socket cable section is suitable for the power drawn bythe appliance.