DeLonghi DGHS70W Installation And Service Instructions Manual

Contents

DeLonghi DGHS70W Installation And Service Instructions Manual Manual pdf 19 page image

LIGHTING THE BURNERS(fitted with safety cut-off valve)In order to light the burner, you must:1 – Models fitted with electric lighter incorporated into the burner knobs:Turn the knob fig. 12 in anti-clockwise direction up to the maximum aperture(symbol ), push in and hold the knob; this will light the gas.2 – Wait for about ten seconds after the gas burner has been lit before letting goof the knob (valve activation delay).3 – Adjust the gas valve to the desired position.Important If the burner flame should go out, the safety valve will automatically stop thegas flow. To re-light the burner, return the knob to the closed position, wait for at least1 minute and then repeat the lighting procedure. N.B. If your local gas supply makes it difficult to light the burner with the knobset to maximum, set the knob to minimum and repeat the operation. Whenever lighting any of the burners produces an abnormal flame, switch thatburner off and relight using the minimum setting. If after relighting the burner, the flame is still abnormal, turn the burner off andcontact our Customer Service Centre to obtain the nearest authorized DelonghiService Agent.19