DeLonghi ECAM44.66X ELETTA Instructions For Use Manual

Contents

12To change the taste, press the button (fig. 10) repeat-edly until the required taste is displayed.Selecting the quantity of coffee in the cupThe appliance is set by default to make a standard quantity ofcoffee. To select the quantity of coffee, press thebutton (fig. 11) until the message corresponding to the requiredquantity of coffee is displayed:Coffee selected Quantity in cup (ml)MY COFFEE Programmable:from ≃20 to ≃180SHORT ≃40STANDARD ≃60LONG ≃90EXTRA LONG COFFEE ≃120Customising the “my coffee” quantityThe appliance is set by default to automatically deliver 30 ml of“MY COFFEE”.To modify this quantity, proceed as follows:1. Place a cup under the coffee spouts (fig. 12).2. Press the button (fig. 11) until “MY COFFEE” isdisplayed.3. Keep the button (fig. 16) pressed until the message“1 MY COFFEE Program quantity” is displayed and coffeedelivery begins. Release the button.4. As soon as the coffee in the cup reaches the required level,press the button (fig. 16) again.The quantity of coffee in the cup set has now been programmed.Adjusting the coffee millThe coffee mill is set by default to prepare coffee correctly andshould not require regulating initially.However, if after making the first few coffees you find that thecoffee is either too weak and not creamy enough or delivery istoo slow (a drop at a time), this can be corrected by adjustingthe grinding adjustment dial (fig. 13).Please note!The grinding adjustment dial must only be turned when thecoffee mill is in operation.If the coffee is delivered too slowly ornot at all, turn one click clockwise to-wards “7”.For fuller bodied creamier coffee, turnone click anticlockwise towards “1” (donot turn more than one click at a timeotherwise the coffee could be delivereda drop at a time).These adjustments will only be evident after at least 2 cups ofcoffee have been delivered.If this adjustment does not obtain the desired result, turn thedial another click.Tips for a hotter coffeeFor hotter coffee, you should:• perform a rinse cycle, selecting the “Rinsing” function inthe settings menu (page10).• warm the cups by rinsing them with hot water (using thehot water function);• increase the coffee temperature in the settings menu(page 11).Making coffee using coffee beansImportant!Do not use caramelised or candied coffee beans as they couldstick to the coffee mill and make it unusable.1. Fill the container with coffee beans (fig. 14).2. Place under the coffee spouts:- 1 cup, if you want to make 1 coffee (fig. 12);- 2 cups if you want 2 coffees (fig. 15).3. Lower the spout as near as possible to the cups (fig. 15).This makes a creamier coffee.4. Press the button corresponding to the number of coffeesrequired (1 cup or 2 cups ).5. Preparation begins. The amount of coffee selected is dis-played together with a progress bar which gradually fills aspreparation progresses.Please note:• While the machine is making coffee, delivery can be inter-rupted at any moment by pressing any button.• At the end of delivery, to increase the quantity of coffee inthe cup, just press (within 3 seconds) one of the coffee but-tons ( or ) (fig. 16).Once the coffee has been made, the appliance is ready to makethe next drink.Please note!