2A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plugshould be cut off from the mains lead, and an appropriate plug fitted, as below.WArnInG: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socketelsewhere in the house as this could cause a shock hazard.With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is amoulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuseto BS 1362. In the event of losing the fuse cover, the plug must noT be used until a replacement fuse cover can beobtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked onthe base of the plug.B) If your appliance is not fitted with a plug, please follow the instructions provided below:WARNING - THIS APPLIAnce MUST Be eArTHeDImpoRtANtThe wires in the mains lead are coloured in accordance with the following code:Green and yellow: earthBlue: neutralBrown: LiveAs the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminalsin your plug, proceed as follows:The green and yellow wire must be connected to the terminal in the plug marked with the letter e or the earth symbolor coloured green or green and yellow.The blue wire must be connected to the terminal marked with the letter n or coloured black.The brown wire must be connected to the terminal marked with the letter L or coloured red.electrical connection (uk only)