28C6. CAPPUCCINO button: to delivercappuccino or frothed milk.C7. Selection dial: turn to select therequired quantity of coffee.(When inthe settings MENU, turn to select therequired function).C8. Aroma selection button: toselect the coffee tasteC9. button: to perform a rinse cycle.(When in the settings MENU, it acts asthe "ESC" button to exit from theselected function and go back to themain menu).C10. P button: to access the settings menu.C11. button: turns the appliance on andoff.Description of lightsIndicates the need to descale theappliance.Indicates that the grounds container isfull and must be emptied.Indicates that the water tank is emptyand must be filled with fresh water.Indicates that the Auto-Start function isactive.Indicates that an alarm is displayed.Indicates the button to press to confirmthe choice in the menu.Indicates the button to press to exit themenu or selected function.PRELIMINARY CHECKSControls after transportAfter removing the packaging, make sure the pro-duct is complete and undamaged and that allaccessories are present. Do not use the appliance ifit is visibly damaged. Contact De’Longhi CustomerServices.Installing the applianceImportant!When you install the appliance, you should followthe safety warnings below:• The appliance gives off heat. After positioningthe appliance on the worktop, leave a space ofat least 3 cm between the surfaces of theappliance and the side and rear walls and atleast 15 cm above the coffee maker.• Water penetrating the coffee maker couldcause damage. Do not place the appliancenear taps or sinks.• The appliance could be damaged if the waterit contains freezes. Do not install the coffeemaker in a room where the temperature coulddrop below freezing point.• Arrange the power cable in such a way that itcannot be damaged by sharp edges or contactwith hot surfaces (e.g. electric hot plates).Connecting the applianceImportant! Check that the mains powersupply voltage corresponds to the value indicatedon the rating plate on the bottom of the appliance.Connect the appliance to an efficiently earthed andcorrectly installed socket with a minimum currentrating of 10A only. If the power socket does notmatch the plug on the appliance, have the socketreplaced with a suitable type by a qualified pro-fessional.28