DeLonghi Fan Heater Owner's Instruction Manual

Contents

Time OverrideIf you wish to operate the heater without timer, press the “ON MODE” button. The yellowtimer pilot light will go off.5) MODELS WITH ROTATING BODYThis appliance is fitted with a motorized base and a rotating body.To distribute the air flow over a larger area, press the oversized switch (Fig. 3).When activated, the appliance will oscillate from right to left over an angle ofapproximately 30°. To terminate oscillating, simply press the oversized switch again.IMPORTANTYou must leave the heater plugged in and switched on at the mains socket to keep theheaters memory programmed.If you do not require the heater to operate in accordance with the timed programmes simplyoperate via the “ON MODE” button.If the heater looses its electricity supply for more than 2 minutes, e.g. switched off at themains socket or in the event of a power failure, the heater’s programmes will be lost, andthe heater will not work until reset.In the event of a blackout , the appliance will not switch on again automatically.To switch the appliance back on, repeat the procedure described above.MAINTENANCE AND SERVICEAlways remove the plug from the power socket and allow the heater to cool. After the heaterhas cooled, clean it with a soft damp cloth, do not use detergents or abrasives. Periodicallyclean the air intake and outlet grilles during the period in which the heater is in use with avacuum cleaner.Should the heater not be in use over a certain length of time, store it in a dry place.This appliance has been built to provide many years of trouble free service.In case of malfunction, do not try to repair the heater yourself: it may result in fire hazard orelectric shock. Call the nearest Service Center (see attached list of Service Centers).ATTENTIONA safety device switches the fan heater off if it accidentally overheats. An audible signal warnsof any problems. To reset the unit for normal operation, remove the plug from the mains socketfor a few minutes, eliminate the cause of overheating (e.g. air intake or outlet grilles obstructed)and then plug the fan heater back in again. Contact your nearest Service Center if the fanheater does not begin normal operation again.7Fig. 3GB 10-05-2001 9:00 Pagina 7

/ 8

Related manuals for DeLonghi DFH480M