10coffee.C5. oK icon: to enable and confirm the selectedfunction.C6. icon: to rinse or deliver hot water.C7. hot mILK icon: to deliver a cup of steamedmilk.C8. ItALIAn mACChIAto icon: to deliver ashot of espresso with a small amount offoam on top.C9. LonG icon: to deliver one cup ofC10. CAppuCCIno icon: to deliver acappuccino.C11. LAttE icon: to deliver a latte.C12. p icon: to access the programming menu.C13. ESC icon: to exit the selected function inthe menu.C14. icon: to select the coffee’s strength.C15. icon: to select the coffee size.C16. icon: to scroll backwards through theprogramming menu.Information : A light touch is enough toactivate the icon.prELImInAry ChECKSControls after transportAfter removing the packaging, make sure theproduct is complete and undamaged and that allaccessories are present.Do not use the appliance if it is visibly damaged.Contact Customer Service.Installing the applianceImportant!When you install the appliance, you should followthe safety warnings below:• The appliance gives off heat. After positioningthe appliance on the work top, leave a spaceof at least 1 in (3 cm) between the applianceand the side and rear walls and at least 6 in(15 cm) above the coffee maker.• Water penetrating the appliance could causedamage. Do not place the appliance neartaps or sinks.• The appliance could be damaged if thewater it contains freezes. Do not install theappliance in a room where the temperaturecould drop below freezing point.• Arrange the power cable in such a way thatit cannot be damaged by sharp edges orcontact with hot surfaces (e.g. electric hotplates).Connecting the applianceImportant! Check that the power outletsupply voltage corresponds to the valueindicated on the rating plate on the bottom of theappliance.Connect the appliance to an efficiently earthedand correctly installed outlet with a minimumcurrent rating of 12A only. If the power outletdoes not match the plug on the appliance, havethe outlet replaced with a suitable type by aqualified professional.