Dedicated Micros DM/CMVUD500 Installation And Operation Manual

Also see for CamVu 720: Installation and configuration manual

Contents

Dedicated Micros DM/CMVUD500 Installation And Operation Manual Manual pdf 12 page image

Dedicated Micros ©201112 CamVu D500 Minidome Configuring the UnitUsing the Unit with Secure Closed IPTV1) Connect the camera to a Closed IP Network switch using Cat5 network cable. The POE versionof this camera will draw power from with the DM/NSW/CPP model switch, or with DM/NSW/CPmodel switch if connected to a POE injector and separate power supply.2) Ensure that the Closed IP NVR or Console that the switch is connected to is in Configurationmode to allow new cameras connect.3) Power up the camera and wait for the on-screen acknowledgement on the monitor attachedto the Closed IP NVR or Console. Alternatively check the Camera Overview web page on theClosed IP NVR or Console to determine out the camera status.4) Once the camera has been detected and added, remember to secure the switch by moving outof Configuration mode, failure to do this will leave the Closed IPTV system unsecured.Locating the Unit IP addressThe unit is configured using on-board webpages. This can be done remotely once the unit has been installedin its chosen location, using the web browser on a PC in the same subnet as the unit.The unit configuration pages can be accessed using the unit IP address or DNS name. The unit hasDHCP factory enabled. When the unit is connected to a DHCP network for the first time, an IP address isautomatically assigned by the network switch or router it is connected to. Most routers will have the facility toenable DHCP and DNS, if it is not available, contact your network administrator.The default DNS address for each unit is factory set as the serial number. This address can be found on theserial label on the unit or via the packaging the unit came in.If DHCP and DNS are not available, the IP address can be found by connecting an analogue monitor tothe BNC connection of the camera. The unit IP address is displayed on the analogue video output for 10minutes from powering the unit on.The DNS or IP address can be typed directly into the address bar of a web browser.Note: The unit’s DNS address can be changed subsequently to something more memorableor meaningful than its serial number by editing the System name option in the Systemconfiguration page.Zero_conf configurationIf a permanent IP address is not assigned to the unit, it will attempt to contact the DHCP server everytime it starts up, and periodically thereafter. The unit support zero-configuration networking (sometimesknown as Bonjour), this enables automatic discovery of computers, devices, and services on IP networks.Zero-configuration uses industry standard IP protocols to allow devices to automatically discover eachother without the need to enter IP addresses or configure DNS servers. By loading a suitable free add-onto your web browser such as Bonjour for Windows for Internet Explorer or BonjourFoxy for FireFox zeroconfiguration devices such as this unit can easily be discovered and accessed.