Dedicated Micros ICE series Instruction Manual

Contents

Dedicated Micros ICE series Instruction Manual Manual pdf 7 page image

Dedicated Micros ©2007 DomesRecess Mount InstallationRefer to the Quickstart section for more information.1 To recess mount the camera, the shroud must be removed. Gently squeezetogether opposite sides of the shroud as shown and lift it away from the camerabody.2 Using the template supplied at the rear of this manual, mark and cut a 4” (100 mm)diameter hole. A suitably sized hole saw can also be used.To prepare for installation use a suitable screwdriver to loosen the three fixingclamps sufficiently to accommodate the thickness of the tile or ceiling.3 Connect the video to either the BNC at the end of the flying lead or directly to theBNC. Use only one of the BNC connectors to connect video.Connect the power to the power terminals. These cameras are designed to operatefrom a 12V DC or 24V AC power supply. Connections and polarity are indicatednext to the terminals. The power supply must be a UL Listed, Class 2 isolated type.4 Insert the camera into the hole. Using a suitable screwdriver, tighten the three fixingclamps as shown. Do not overtighten the clamps.Camera AdjustmentCamera PositionThe camera assembly is adjustable in all three axes. Adjust the camera until it is pointing in thedesired direction.FOV & FocusUse the levers on the varifocal lens to adjust the camera’s field of view, and focus.