Dedicated Micros SD Range Installation And Operation Manual

Also see for SD Range: Installation and operation guide Quick start guide Installation and operation guide

Dedicated Micros SD Range Installation And Operation Manual Manual pdf 43 page image

Dedicated Micros ©2007 SD RangeSerialThis page allows configuration of the two Serial ports on the rear of the unit. For installationFor installationinformation, refer to ‘Installing the SD DVR’.Serial Port ��2�3�4 Select the serial port to be editedFunction Each serial port can be �isabled, set to �ebug (serialcommunications), �e�t in �mage, or a number of supportedtelemetry products.Mode, Baud Rate, Parity, Data Bits, Stop BitsStop Bits �his allows the communication settings to be configured.Note: When a telemetry protocol is selected these settings will be set to the default to pre-determined values for the protocol, and should not normally be altered manually.Main (��ed) �his button will navigate to the Main page.Camera (Green) �his button will navigate to the Camera settings page.Cancel (Purple) Settings are automatically saved when the page is closed. Usethis button to cancel any changes before navigating away fromthe page.Save �o ‘manually’ save changes whilst in a menu page, select theSave button.6.6