Defender SP500-C Instruction Manual
           | |
SP500-C 3While this camera is weather resistant, it is not waterproof. Please do not install it in areas that receive direct rain orunder eaves trough draining spots. Do not cut the DC power cable of this camera to fit with another power source. Donot cut the video connection wire to fit with a different video connection type. Any unauthorized modifications willvoid your warranty.STEP BY STEP1. Select a location to place yourcamera then, using the provideddrilling template (see back ofmanual), drill the proper holes andplace the provided wall anchors intoeach hole.2. Mount the camera in the selectedlocation by screwing the providedscrews into the camera mount andeach of the wall anchors.3. Adjust camera mount to view thedesired area then, using the providedAllen Key, tighten the screws to lockthe camera into place.Ensure that the camera is properly andtightly secured into the wall.1. Plug the 4 PIN DIN female connectionon the camera into the 4 PIN DINmale connection on the 60ft video/power wire.2. Match up the two arrows that are ontop of both the connecting cables.MOUNTING 2312↑↑↑↑1SETUP |
Related manuals for Defender SP500-C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine