Definitive Technology W Studio Owner's Manual
               | |
owner’s manualStudio4www.definitivetech.comHooking Up Your W Studio to Your TVConnection Method #1All sources into your SoloCinema Studiovia HDMI (recommended)The HDMI cable runs from the HDMI output of the SoloCinema Studio toan HDMI input on the TV set.You will use the SoloCinema Studio remote for switching between the sourcesyou have connected to the system (Blu-Ray player, cable box etc.). Werecommend this method; it ensures the highest resolution audio and videosignals for the best possible audio performance.NOTE: For greater convenience, you can program the SoloCinema Studioto respond to the power, volume, mute, and source select commands of yourTV or cable box remote. See the “IR Learn” section of the OSD Set-up MenuFunctions for instructions.Connection Method #2All sources into your TV, with TOSLINKoptical audio output from the TV set to thesound bar.The TV does all the switching between sources, and the sound bar isalways set to INPUT #5.NOTE: Most TV’s cannot pass a Dolby Digital or DTS 5.1 channel audiosignal through an optical audio output connection. They can only pass2 channel stereo through Toslink. The SoloCinema Studio will simulate asurround experience, but it will not be as effective as when processing atrue 5.1 digital surround signal. This hookup method offers convenience:most functions (including source switching) can be done through one remotecontrol, such as your cable box or TV remote. But you won’t get the bestsystem sound quality, or be able to use all of the features of the SoloCinemaStudio, including your OSD (on-screen displays).TVHDMIINCableBlu-rayCableBlu-rayTVOPTOUTHDMI ININPUTSConnection Method #3All sources into your TV with 3.5mmanalog mini-jack to the sound bar.NOTE: Some older TV’s have only an analog output connection. In thisscenario, the TV does all the switching between sources and the SoloCinemaStudio is always set to INPUT #4. A Dolby Digital or DTS digital audio signalcannot be passed through a TV’s analog output connection. The best audiosignal quality that can be reproduced using this method is two-channel stereoaudio. This method is the least-preferred connection method of the threedescribed here.Pairing the SubwooferThe sound bar and the subwoofer come paired from the factory. All you dois plug in the subwoofer’s power cord and turn on the ON/OFF POWERswitch. When you turn on the sound bar, both the bar and subwoofer willestablish a communication link.CableBlu-rayRHDMI IN INPUTSL |
Related manuals for Definitive Technology W Studio
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine