Defy DAW387 Instruction Manual

Defy DAW387 Instruction Manual Manual pdf 9 page image

9 / ENWashing Machine / User’s Manual4.1.6 Adjusting the feetA CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balancedon its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushingand vibration problems.CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.1 Loosen the lock nuts on the feet by hand.2 Adjust the feet until the product stands in a stable and balanced way.3. Tighten all lock nuts by hand again.4.1.7 Electrical connectionConnect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for anydamages that will arise when the product is used without grounding in accordance with the local regulations.• Connection must comply with national regulations.• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of aGroud Fault Circuit Interrupter (GFCI) is recommended.• Power cable plug must be within easy reach after installation.• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electricianinstall a 16 Amp fuse.• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.• Do not make connections via extension cables or multi-plugs.B CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.4.1.8 Initial useBefore starting to use the product make sure that the preparations aremade which are in line with the “Important Safety and EnvironmentInstructions” and the instructions in the “Installation” section.To prepare the product for washing laundry, perform first operationin Drum Cleaning programme. If this program is not available in yourmachine, apply the method which is described in the section 4.4.2.C Use an anti-limescale suitable for the washing machines.Some water might have remained in the product due to the quality control processes in the production. It is not harmful forthe product.